Page 1 of 8

Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 9:41 am
by Bartman
Hi everybody,
After coming to the end of my warranty in December, I finally pulled the plug and got the crank pulley and ecu tune done on my V6s at David Appleby Engineering yesterday, all I can say is Wow!!! The transformation is amazing, the drive back to Stockport was exhilarating, and the biggest surprise was that on the way down to Oxford, I managed a measly 19.4 mpg average, on the way back after the tune I averaged 29.6 mpg! The car pulls like a train and has been transformed into a completely different animal, she's gone from a thoroughbred racehorse to a saddled cheetah, it's like having a new car again, big thanks to the guys at D.A.E, for making my day and transforming the big cat from a Jaguar to a Cheetah. :o

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 10:36 am
by Deleted User 1088
Hello

Well done .. just a couple of questions if that would be ok ? also to add you went to the right place for the upgrade :)

1. how much did it cost
2. How long did they have the car

best regards

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 10:44 am
by daytona650
Very interesting - i have the same questions and also what power are you making now?

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 10:47 am
by Deleted User 1088
according to the website .. for my model that is some increase

STOCK V6 BASE = 340BHP --> TUNED 453BHP & 436ft/lbs

link .... http://www.davidapplebyengineering.com/jagf-type.html

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 11:29 am
by simpleR
Very good gains for £1,800 for out of warranty cars.

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 11:36 am
by Bartman
kaspa wrote: Tue Feb 13, 2018 10:36 am Hello

Well done .. just a couple of questions if that would be ok ? also to add you went to the right place for the upgrade :)

1. how much did it cost
2. How long did they have the car

best regards
Hi Kaspa, the total price including vat and labour came to £2,034, they had the car for about 3 hours.

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 11:37 am
by Bartman
Hi Kaspa, the total price including vat and labour came to £2,034, they had the car for about 3 hours.

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 11:44 am
by Bartman
daytona650 wrote: Tue Feb 13, 2018 10:44 am Very interesting - i have the same questions and also what power are you making now?
I've not dyno tested the car, but I believe the modifications take the power to 453 bhp, i'm guessing from the difference between before and after, that the quoted figures are definitely in that ballpark, and like I said on the thread, a massive gain in fuel economy from the drive down to Oxford to the drive back to Stockport.

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 11:56 am
by chicb
Very impressive, 340bhp to 453bhp for not a lot of money wow. Throw in the far better fuel consumption, you have done very well
Enjoy!!!!!

Re: Crank pulley + Ecu tune on V6s.

Posted: Tue Feb 13, 2018 12:06 pm
by Malbec
Was there much increase in your insurance premium?