Page 1 of 8
Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 9:41 am
by Bartman
Hi everybody,
After coming to the end of my warranty in December, I finally pulled the plug and got the crank pulley and ecu tune done on my V6s at David Appleby Engineering yesterday, all I can say is Wow!!! The transformation is amazing, the drive back to Stockport was exhilarating, and the biggest surprise was that on the way down to Oxford, I managed a measly 19.4 mpg average, on the way back after the tune I averaged 29.6 mpg! The car pulls like a train and has been transformed into a completely different animal, she's gone from a thoroughbred racehorse to a saddled cheetah, it's like having a new car again, big thanks to the guys at D.A.E, for making my day and transforming the big cat from a Jaguar to a Cheetah.
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 10:36 am
by Deleted User 1088
Hello
Well done .. just a couple of questions if that would be ok ? also to add you went to the right place for the upgrade
1. how much did it cost
2. How long did they have the car
best regards
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 10:44 am
by daytona650
Very interesting - i have the same questions and also what power are you making now?
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 10:47 am
by Deleted User 1088
according to the website .. for my model that is some increase
STOCK V6 BASE = 340BHP --> TUNED 453BHP & 436ft/lbs
link ....
http://www.davidapplebyengineering.com/jagf-type.html
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 11:29 am
by simpleR
Very good gains for £1,800 for out of warranty cars.
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 11:36 am
by Bartman
kaspa wrote: ↑Tue Feb 13, 2018 10:36 am
Hello
Well done .. just a couple of questions if that would be ok ? also to add you went to the right place for the upgrade
1. how much did it cost
2. How long did they have the car
best regards
Hi Kaspa, the total price including vat and labour came to £2,034, they had the car for about 3 hours.
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 11:37 am
by Bartman
Hi Kaspa, the total price including vat and labour came to £2,034, they had the car for about 3 hours.
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 11:44 am
by Bartman
daytona650 wrote: ↑Tue Feb 13, 2018 10:44 am
Very interesting - i have the same questions and also what power are you making now?
I've not dyno tested the car, but I believe the modifications take the power to 453 bhp, i'm guessing from the difference between before and after, that the quoted figures are definitely in that ballpark, and like I said on the thread, a massive gain in fuel economy from the drive down to Oxford to the drive back to Stockport.
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 11:56 am
by chicb
Very impressive, 340bhp to 453bhp for not a lot of money wow. Throw in the far better fuel consumption, you have done very well
Enjoy!!!!!
Re: Crank pulley + Ecu tune on V6s.
Posted: Tue Feb 13, 2018 12:06 pm
by Malbec
Was there much increase in your insurance premium?