So there is tubes that fit to the OEM exhaust to open the valves. In dynamic mode it seems that the valves open up automatically. seems in Dynamic config, everything is "On" (Throttle, Exhaust, Suspension).
Question is if you're fitting an aftermarket system such as Velocityap with no valves and are not utilizing the pipes is it ok to just plug them and tie out of the way. This would leave you not using the active exhaust button. But in dynamic mode would the car be trying to open valves that are no longer their , so would this be an issue as there plugged, should they be left unplugged, would it make a difference. Has anyone fitted such and did you unplug or plug the tubes.
Exhaust vacuum tubes, block or not.
-
- Posts: 193
- Joined: Thu Nov 16, 2017 12:04 am
Caledra Red 2018 2.0 R Dynamic
Black Pack
Project 7 Grill
Eibach Lowering Springs
Judd Model One 21" Rims
305/25/21 rears 265/30/21 fronts
Maxton design rear lip spoiler & rear diffuser splitters
Rear box delete, twin straight pipes fitted
Black Pack
Project 7 Grill
Eibach Lowering Springs
Judd Model One 21" Rims
305/25/21 rears 265/30/21 fronts
Maxton design rear lip spoiler & rear diffuser splitters
Rear box delete, twin straight pipes fitted
Hello
I would plug them .. otherwise you would be sucking in extra air all the time
older models have a compressor and newer models use the vacuum from the engine .. so depends on model year
I would plug them .. otherwise you would be sucking in extra air all the time
older models have a compressor and newer models use the vacuum from the engine .. so depends on model year
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 10 Replies
- 4204 Views
-
Last post by FtypeRpower
-
- 6 Replies
- 3165 Views
-
Last post by scm
-
- 2 Replies
- 1170 Views
-
Last post by simpleR
-
- 2 Replies
- 197 Views
-
Last post by Nobbyk
-
- 2 Replies
- 1519 Views
-
Last post by Ftype2015