Do you happen to have the part numbers?
Thanks
Andrew
Single piece grille F Type R 2015....
-
- Posts: 967
- Joined: Sun Nov 13, 2016 7:30 pm
- Location: Nottingham UK
Hello MITM,
There’s a thread on the US F-Type forum. It’s goes into lots of detail about all aspects of this project. I’ve a set of these sensor pockets which will be fitted when I get my grill done professionally...
I’m sure someone out there would be able to produce a set. My F-Type phone holder was 3-D printed by Knightspeed. A Northern Ireland company specialising in bespoke F-Type gadgets. They maybe worth a try.
Miles away but check out The Bodycentre Ltd. They are in Norwich but are the type of setup you want to be looking for. Top class work of all top makes. JLR Approved etc. I follow them on Instagram & they post all sorts of stuff.
Cannot wait to see your finished photos. Are you going for the stickered plate? In my view there’s no point in doing this if the plate appears on it.
All the best,
Darren
There’s a thread on the US F-Type forum. It’s goes into lots of detail about all aspects of this project. I’ve a set of these sensor pockets which will be fitted when I get my grill done professionally...
I’m sure someone out there would be able to produce a set. My F-Type phone holder was 3-D printed by Knightspeed. A Northern Ireland company specialising in bespoke F-Type gadgets. They maybe worth a try.
Miles away but check out The Bodycentre Ltd. They are in Norwich but are the type of setup you want to be looking for. Top class work of all top makes. JLR Approved etc. I follow them on Instagram & they post all sorts of stuff.
Cannot wait to see your finished photos. Are you going for the stickered plate? In my view there’s no point in doing this if the plate appears on it.
All the best,
Darren
White 2014 V6 Coupe
OEM P7 Grill
VAP Lowering Springs
VAP 200 Cell Cats & Downpipes
VAP Pulley & Stage II 453 BHP Remap
Vorsteiner 21” V-FF 103 Alloys
PB Brakes 8/6 Pot Drilled Big Brake Kit
OEM P7 Grill
VAP Lowering Springs
VAP 200 Cell Cats & Downpipes
VAP Pulley & Stage II 453 BHP Remap
Vorsteiner 21” V-FF 103 Alloys
PB Brakes 8/6 Pot Drilled Big Brake Kit
-
- Posts: 24
- Joined: Wed Jun 13, 2018 3:38 pm
Hi DaddyDarren
Those look well cool
I’ll check out that body shop cheers mate.
I was thinking about the Sho and Go style plate holder but I do want to relocate the plate lower down.
I’ll post some pictures when I get the parts and part numbers etc.
Those look well cool
I’ll check out that body shop cheers mate.
I was thinking about the Sho and Go style plate holder but I do want to relocate the plate lower down.
I’ll post some pictures when I get the parts and part numbers etc.
-
- Posts: 39
- Joined: Sat Mar 24, 2018 8:58 am
Fairly certain this has been debunked.
The early brackets made on the other forums left the sensor recessed too far into the grill. So you were getting false positives constantly as the grill was being detected. It was fixed by having deeper brackets which hold the sensors further forwards.
Can you share p7 VIN number?Mikeinthemidlands wrote: ↑Wed Jun 20, 2018 3:01 pm I've now placed an order for the Project 7 grille from Jag. It comes in two parts - the mesh and the surround (a choice of grey or white). I opted for grey but I will get it painted gloss black anyway.
Darren, are you able to share more info re the 3D printed sensor pockets?
Can anyone recommend a great bodyshop in the Birmingham/Solihull area. Willing to travel though for a quality finish.
I'm also looking for the bodyshop to remove and ceramic paint my exhaust tips in matt black
Thanks
Mikeinthemidlands
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 15 Replies
- 718 Views
-
Last post by davidls
-
- 0 Replies
- 703 Views
-
Last post by Mixmastermikey
-
- 14 Replies
- 3944 Views
-
Last post by Robbyrner
-
- 5 Replies
- 995 Views
-
Last post by gasgas
-
- 12 Replies
- 3398 Views
-
Last post by Eclipse83