Hi Guys - few days into ownership, and have made a start on little jobs... the car was in fantastic condition, a real testament to NAC63 - Have added oem carbon fibre dash, as its about the only non-cf part of the car! Also fitted a clear perspex wind deflector - cant comment on rattles etc yet as havent driven it.
I need to put a new personal reg on the car... and just noticed the current rear place is extra large... the front is normal.
Is it normal to have the large size really plate on an F-Type, so it fills the whole area... or are they normally standard size.
Dont suppose anyone has any pics?
its not a big deal, just want to get the right look!
cheers
Rear Number Plate - Help
I took off a standard size plate and put back a standard, but it will take the large, like on the Evoque, just more yellow...
MY19 Carpathian Grey R-Dynamic P300, Black pack in and out, 12 way Memory seats, Climate Pack, Park assist, Meridian Surround, switchable exhaust.
When I looked at mine pre-purchase it had a neat, small plate on, but when I went to collect it they'd replaced it with a ghastly big one. I complained and they put a new small one on. Big area of yellow looked horrible (to me) on a white car. It may look okay on some colour combos, but ....
MY18 F-Type V8 R AWD in Glacier White
Lots of leather and toys, and loads of noise!
Lots of leather and toys, and loads of noise!
-
- Posts: 967
- Joined: Sun Nov 13, 2016 7:30 pm
- Location: Nottingham UK
Good we are all different. Disliked the ‘normal’ sized plate in the obvious larger area. Had one made to fit...
Plate is clear of all dealer clutter. Just my reg
Plate is clear of all dealer clutter. Just my reg
White 2014 V6 Coupe
OEM P7 Grill
VAP Lowering Springs
VAP 200 Cell Cats & Downpipes
VAP Pulley & Stage II 453 BHP Remap
Vorsteiner 21” V-FF 103 Alloys
PB Brakes 8/6 Pot Drilled Big Brake Kit
OEM P7 Grill
VAP Lowering Springs
VAP 200 Cell Cats & Downpipes
VAP Pulley & Stage II 453 BHP Remap
Vorsteiner 21” V-FF 103 Alloys
PB Brakes 8/6 Pot Drilled Big Brake Kit
I actually have shortened plate, but standard 11cm height I think it is. It does sit a bit high, the larger plate centralises it more, but does look rubbish.
Unfortunately behind the plate there are holes in the plastic, so you can't move it down at all.
So it's an improvement, but not ideal.
Small front and rear for me
MY14 3.0S Convertible. Polaris White with black hood, Black pack, Design pack, 20" Cyclones, Red performance heated seats, heated flat bottom steering wheel, Meridian sound system, plus lots more
I have the bigger one like DaddyDarren, i much prefer it to small one, even though I only have 5 characters. As said above, we are all different. I got my shaped one from Gould in Nailsea.
MY 2018 V8R AWD Convertible
Ammonite Grey / Black Leather
Modifications:
SVR Bonnet Vents
Flat Bottomed Steering Wheel
Jaguar Aluminium Paddles
Ammonite Grey / Black Leather
Modifications:
SVR Bonnet Vents
Flat Bottomed Steering Wheel
Jaguar Aluminium Paddles
I have a 5 digit/letter registration so have considered shortening it but will wait until I see one like yours ‘in the flesh’scz4 wrote: ↑Wed Jul 01, 2020 4:46 pmI actually have shortened plate, but standard 11cm height I think it is. It does sit a bit high, the larger plate centralises it more, but does look rubbish.
Unfortunately behind the plate there are holes in the plastic, so you can't move it down at all.
So it's an improvement, but not ideal.
-
- Posts: 94
- Joined: Wed Apr 04, 2018 1:23 pm
- Location: West London
Corrie grey svr Coupé
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 1 Replies
- 1778 Views
-
Last post by simpleR
-
- 10 Replies
- 7576 Views
-
Last post by Tel
-
- 1 Replies
- 2241 Views
-
Last post by scm
-
- 10 Replies
- 2713 Views
-
Last post by DaddyDarren
-
- 25 Replies
- 1094 Views
-
Last post by Billymcmred