Has to be the Gloss black grill for the front bumper (T2R3563) How do they justify £500 for the gloss black part versus £150 for the chrome part
It's the one change to the car I really want to make, but struggle to justify. Painting could just lead to an awful stone chipped look in a few years.
'
Most outrageously priced Accessory?
- Dan_Veluwe
- Posts: 1180
- Joined: Wed May 02, 2018 5:30 pm
- Location: Dutch Highlands [Veluwe]
Wrap it..
Range Rover P400e autobiography Loire Blue (2019)
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
Challenging shape to wrap I believe...
- Dan_Veluwe
- Posts: 1180
- Joined: Wed May 02, 2018 5:30 pm
- Location: Dutch Highlands [Veluwe]
Not at all, actually quite easy.
-Cut an over sized piece;
Then heat is slightly and pull it tightly over the outside edge back.
A piece that size costs around € 20.
Better : any wrap outfit does it for you at € 20 labourcosts..
-Cut an over sized piece;
Then heat is slightly and pull it tightly over the outside edge back.
A piece that size costs around € 20.
Better : any wrap outfit does it for you at € 20 labourcosts..
Range Rover P400e autobiography Loire Blue (2019)
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
-
- Posts: 40
- Joined: Thu Dec 03, 2020 9:52 am
Hydro-dipping and good lacquer layers works well too and is almost as cheap as Wrapping. Particularly good for that Carbon Fibre look without the price tag.
There speaks an ex-Mustang owner RT
And yes, what a great random name!
And yes, what a great random name!
MY14 "S" badged V6 Convertible in Lunar Grey metallic
Performance seats, Meridian, heated flat bottom wheel with aluminium paddles, heated front screen, cruise, dual zone climate, switchable active exhaust
Performance seats, Meridian, heated flat bottom wheel with aluminium paddles, heated front screen, cruise, dual zone climate, switchable active exhaust
- Dan_Veluwe
- Posts: 1180
- Joined: Wed May 02, 2018 5:30 pm
- Location: Dutch Highlands [Veluwe]
It can give the the same look. I had lots of interior parts H2O-dipped. But I think it would be a mistake to do this with a grille.RomanticTuna wrote: ↑Sat Jan 23, 2021 5:35 am Hydro-dipping and good lacquer layers works well too and is almost as cheap as Wrapping.
Stones hit it easily and dipping is hard to touch up. I also assume with a single piece ( I normally had 5 -10 parts dipped at a go),
the price would touch € 50. And the wrapping you can remove if the result doesn't suit you. Dipping is non-reversible if you want
to do it properly : you need a base coat.
I left the pattern. Normally they smoothen it before painting en dipping. I wanted this "gun-handle" look !
F-Pace (now sold) :
Range Rover P400e autobiography Loire Blue (2019)
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
-
- Posts: 40
- Joined: Thu Dec 03, 2020 9:52 am
So that's been dipped? You left the texture on? Looks good. I wouldn't have guessed at dipped.
- Dan_Veluwe
- Posts: 1180
- Joined: Wed May 02, 2018 5:30 pm
- Location: Dutch Highlands [Veluwe]
Thanks ! Since JLR got so many comments about the lack of wood they put it back in the new F-Pace.RomanticTuna wrote: ↑Sat Jan 23, 2021 5:13 pm So that's been dipped? You left the texture on? Looks good. I wouldn't have guessed at dipped.
I think it will return someday in the F-type too.
Yes. The dealer removed the parts. I drove around without these two week waiting for the dipper.
Range Rover P400e autobiography Loire Blue (2019)
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
Mazda__MX30_RED___2021_ BEV
FT jag _P300 _Ultra Bleu, 2018 ___________SOLD
D5 lr__SD4__Corris Grey, Blck roof, 2018_SOLD
FP Jag – 25t _Loire Blue ,2020 ____________SOLD
-
- Posts: 40
- Joined: Thu Dec 03, 2020 9:52 am
Can I ask who you got to do it?
I have previously done parts like the scuff plate on the door as it becomes more worn from clumsy feet, get some extra hard lacquer layers on and then you can polish out if needed with a "magic sponge". Works too.
I have previously done parts like the scuff plate on the door as it becomes more worn from clumsy feet, get some extra hard lacquer layers on and then you can polish out if needed with a "magic sponge". Works too.