Quick Tip - Window Drop/Raise
Posted: Sat Jan 26, 2019 1:00 pm
Hello All,
Noticed, when closing my door, that things weren’t moving as they should. Then spotted a rubber trim piece out of place. This was at the bottom of the fixed window frame where the door window closes onto.
I’ve smeared a coating of silicone grease on the vertical rubbers that the edge of the door windows meet when closing. This has made the opening/closing of the doors smoother. Will put less strain on the motor & rubbers.
Not life changing but may prevent premature wear on these parts.
Noticed, when closing my door, that things weren’t moving as they should. Then spotted a rubber trim piece out of place. This was at the bottom of the fixed window frame where the door window closes onto.
I’ve smeared a coating of silicone grease on the vertical rubbers that the edge of the door windows meet when closing. This has made the opening/closing of the doors smoother. Will put less strain on the motor & rubbers.
Not life changing but may prevent premature wear on these parts.