Bonnet Vents & Water Ingress
BobHarrington wrote: ↑Thu Oct 14, 2021 4:36 pm Can’t find George05 on the yank forum.
Can you say what his simple fix is? Or give a link?
Thanks
This is what I've done on my car.
Easy to do and it's effective.
viewtopic.php?p=48965#p48965
viewtopic.php?p=49064#p49064
2016MY V6S Coupe RWD Auto 380PS Supercharged
Rhodium Silver
Panoramic Glass Roof
Sports Seats (heated) in Jet Leather
Seat Memory Pack 2 (14x14 way)
Powered Tailgate (open & close)
Reverse Park Camera with Guidance
Front Parking Aid
Rhodium Silver
Panoramic Glass Roof
Sports Seats (heated) in Jet Leather
Seat Memory Pack 2 (14x14 way)
Powered Tailgate (open & close)
Reverse Park Camera with Guidance
Front Parking Aid
-
- Posts: 131
- Joined: Tue Nov 28, 2017 4:48 pm
- Location: Lymington
At a recent service when the s/plugs were renewed, I was warned there was mild corrosion around the plugs and injectors. They recommended fitting different bonnet vents that would direct the water away, but was told they cost £500+ for the pair.
I thought it worth trying some gorilla tape first. Just back for a 1,000+ mile car tour, with lots of rain. Tape seems fine and doing it’s job, but I’ll still check it from time to time.
I thought it worth trying some gorilla tape first. Just back for a 1,000+ mile car tour, with lots of rain. Tape seems fine and doing it’s job, but I’ll still check it from time to time.
@BobHarrington: I've also thought about fitting the ‘shrouded’ bonnet vents but they too allow water into the engine bay as you can see from the first post in this topic.
When I’ve been out for a decent drive, after returning home I can still feel the heat coming from the ‘open mesh’ bonnet vents an hour or so after engine shutdown. This is why I’ve kept them on the car as they are serving their purpose.
If you wanted the ‘shrouded’ gloss black bonnet vents, they can be purchased for less than the £500 you mention, by shopping around online.
Good to hear the Gorilla tape is fine and doing its job (I'm assuming you’ve applied this onto the left and right sides of the plastic engine cover). I also check mine now and again and still have the black duck tape on it that I applied almost a year ago. I’ll be removing it and putting a fresh layer on in the next few months. I haven’t replaced it with the black aluminium foil adhesive tape which isn’t as strong and tears more easily.
When I’ve been out for a decent drive, after returning home I can still feel the heat coming from the ‘open mesh’ bonnet vents an hour or so after engine shutdown. This is why I’ve kept them on the car as they are serving their purpose.
If you wanted the ‘shrouded’ gloss black bonnet vents, they can be purchased for less than the £500 you mention, by shopping around online.
Good to hear the Gorilla tape is fine and doing its job (I'm assuming you’ve applied this onto the left and right sides of the plastic engine cover). I also check mine now and again and still have the black duck tape on it that I applied almost a year ago. I’ll be removing it and putting a fresh layer on in the next few months. I haven’t replaced it with the black aluminium foil adhesive tape which isn’t as strong and tears more easily.
2016MY V6S Coupe RWD Auto 380PS Supercharged
Rhodium Silver
Panoramic Glass Roof
Sports Seats (heated) in Jet Leather
Seat Memory Pack 2 (14x14 way)
Powered Tailgate (open & close)
Reverse Park Camera with Guidance
Front Parking Aid
Rhodium Silver
Panoramic Glass Roof
Sports Seats (heated) in Jet Leather
Seat Memory Pack 2 (14x14 way)
Powered Tailgate (open & close)
Reverse Park Camera with Guidance
Front Parking Aid
-
- Posts: 17
- Joined: Sat Jan 15, 2022 9:05 am
Good Afternoon All,
Is corrosion normal around the cylinder head. See photos.
Purchased from JLR Just hade 3 Fuel injectors replaced NOT under warranty. Water ingress. apparently with every bolt they touched they snapped.
I've owned the car for 6months and done 1200 miles.
Not impressed with the quality.
Is corrosion normal around the cylinder head. See photos.
Purchased from JLR Just hade 3 Fuel injectors replaced NOT under warranty. Water ingress. apparently with every bolt they touched they snapped.
I've owned the car for 6months and done 1200 miles.
Not impressed with the quality.
-
- Posts: 17
- Joined: Sat Jan 15, 2022 9:05 am
My Concern is how long will it last. It Is what it is.
Just another nail in. I am truly shocked at the build quality.
Just another nail in. I am truly shocked at the build quality.
Surely you should be more shocked at how previous owners let it get in that state. The best build quality in the world is no match for neglect.
MY18 F-Type V8 R AWD in Glacier White
Lots of leather and toys, and loads of noise!
Lots of leather and toys, and loads of noise!
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 12 Replies
- 2413 Views
-
Last post by davidls
-
- 5 Replies
- 944 Views
-
Last post by Buildermike
-
- 0 Replies
- 4944 Views
-
Last post by Banner77
-
- 2 Replies
- 1526 Views
-
Last post by Ftype2015
-
- 51 Replies
- 8920 Views
-
Last post by Moss