Moving the seats with dead battery Reply Subscribe (Water damaged car)
Hello everyone, i have big problem, my f type has no battery inside because it is water damaged, and i need to disassemble the seats, but can't move them with no power. So the question is somebody can help me and explain how to connect directly to the seat motors connectors for move them with a 12v power supply, to which pin or wire i need connect the battery for move them, thank you all in advance!
-
- Posts: 1949
- Joined: Sat Apr 15, 2017 8:37 pm
I’d certainly not attempt to power the motors directly. Risks more damage to them or control modules.
Would start by putting power to the jump start points under the bonnet. Front left corner
Positive a red cover on it and negative a post on the inner wing
How about then introducing yourself
Would start by putting power to the jump start points under the bonnet. Front left corner
Positive a red cover on it and negative a post on the inner wing
How about then introducing yourself
2014 MY 3.0 V6S Roadster
Subtle enhancements to create the car I wanted from SVR nose cone, 400 series side skirts & customised 'design' rear bumper, to heated SVR steering wheel and more
Subtle enhancements to create the car I wanted from SVR nose cone, 400 series side skirts & customised 'design' rear bumper, to heated SVR steering wheel and more
The seats each have their module and are connected to the CANBUS, so as cj10jeeper said it would be best to hook up another battery or decent 12v supply to the car otherwise you’ll end up frying modules
MY18 V6S AWD P400 Santorini Black
MY16 V6S AWD British Racing Green (Rejected)
MY16 V6S AWD British Racing Green (Rejected)
-
- You may also be interested in...
- Replies
- Views
- Last post