Climate control drivers side not working

Technical Advice, Faults and How-To Information.
Post Reply
Nick
Posts: 365
Joined: Mon Apr 10, 2017 2:05 pm
Location: Canberra

Post by Nick »

Have done some searches but nothing yet.

Went to adjust the temperature/seat temp dial and it doesn’t work, stuck on “low”, seat heater also doesn’t work.

Has anyone had this, suspect the dial is u/s
MY15 Coupe V8R Carbon Ceramic Brakes, 20" Anthracite Wheels Panoramic Roof, Meridian 770

User avatar
scm
Posts: 5032
Joined: Fri Aug 10, 2018 11:39 am
Location: Southampton, UK

Post by scm »

Is the passenger side working? Have you checked any fuses (I don't know which ones for your MY)?
MY18 F-Type V8 R AWD in Glacier White
Lots of leather and toys, and loads of noise!
Nick
Posts: 365
Joined: Mon Apr 10, 2017 2:05 pm
Location: Canberra

Post by Nick »

Passenger side is working, I have dual climate control, when I set it to single control the pax temperature changes to Low mirroring the drivers side.

I will have a look into fuses, didn’t think to check as it was actually showing low, and thought if a fuse had gone it would be blank.
MY15 Coupe V8R Carbon Ceramic Brakes, 20" Anthracite Wheels Panoramic Roof, Meridian 770
User avatar
scm
Posts: 5032
Joined: Fri Aug 10, 2018 11:39 am
Location: Southampton, UK

Post by scm »

Nick wrote: Sun Aug 02, 2020 6:12 pm I will have a look into fuses, didn’t think to check as it was actually showing low, and thought if a fuse had gone it would be blank.
No, that's me not thinking! But if there are straws to clutch at .... ;)
Good luck with getting it sorted out.
MY18 F-Type V8 R AWD in Glacier White
Lots of leather and toys, and loads of noise!
Simon M
Posts: 1
Joined: Wed Mar 10, 2021 2:41 pm

Post by Simon M »

Hi Nick, I have the same issue, did you resolve yours?
User avatar
Tel
Posts: 2383
Joined: Sat Apr 19, 2014 7:26 pm
Location: Deepest, Darkest, Darzet.

Post by Tel »

1. Whip off the positive lead form the battery for half a minute - small adjustable required.
2. If issue is still there, likely culprit is the connections to the small panel at the back of the control cluster - lots of thin plastic pry bars needed and Torx
2016MY V8R IRR
ITG Maxogen Cold air intake kit
Billet OBD lock
Forged lightweight Blades
Full custom Xpel Ultimate PPF wrap
Piano Black badges
17mm MST Hubcentrics
Smarttop remote
Black exhaust tips
Porterfield RS-4 Carbon Kevlar pads
Mich PS4S's
+ more 💩
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post