Exhaust trim and elbow grease

[Clumsy]

wd 40 works well

Bit of WD40 and some elbow power is all you need on the pipes

[WShudds]

Never dull works amazing, I used for the first time yesterday and I'm sold. I've experience with a lot of different types of metal polishers and this is really good.

[MikeM]

First used Solvol Autosol in the 60’s to polish the alloy engine casings and mega exhausts on Lambretta’s. The tube and branding hasn’t changed, it’s been around for nearly a century and is an excellent product. As already stated, if its a plated component, it is a fine abrasive, so once you’ve cleaned the old crap off switch to something gentler for regular maintenance.

[gasgas]

forget the elbow grease, put a cloth on the end of your battery drill, works a treat

[MArtyn Veg]

I'll get the tartan paint and indicator fluid while I'm at it too!

Spirit-level bubbles are in short supply around here. Let me know if you spot any of those!

Sold out around here too! Plenty of glass hammers and long weights though!

[Madlil]

Autosol for me - pipes on my previous Boxster sooted up after every drive and needed constant attention. Hoping the F Type is a bit less sooty…