Hi troops planning to change my wheels to either vossen hf5 or concaver cvr5
The usual et for aftermarket are et40 fronts and et35 rear but I know a few have put 15mm or 20mm spacers on with no rubbing issues
So in theory if I did say et30f and et25 rear would thar fill out the arches a bit
Wheel spacers and offset
-
- Posts: 94
- Joined: Wed Apr 04, 2018 1:23 pm
- Location: West London
Hi Gasman,I have vorsteiner v FF 103 a ET32 and ET 50 and no need for wheel spacers
Corrie grey svr Coupé
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
-
- Posts: 94
- Joined: Wed Apr 04, 2018 1:23 pm
- Location: West London
They are 21x9 ET 32 Front 21x11ET50 on the rear , didn’t have a choice as that was the only size available for the F type. I like the vossen
HF5 that you mentioned, if you are planning on fitting the PB brakes they can supply you a template to check the clearance.
HF5 that you mentioned, if you are planning on fitting the PB brakes they can supply you a template to check the clearance.
Corrie grey svr Coupé
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
Carbon graphite vorsteiner wheels
Kw lowering springs
PB big brakes
At present have been talking to concaver their cvr5 is very like the vossen
If I stick to 9x20 and 10.5x20 I can get a nice concave look
As my car is carpethian grey I am looking at platinum black for the wheels
My p b brakes should be shipping Monday
Gone for same kit as you
Red calipers and floating drilled and grooved discs
If I stick to 9x20 and 10.5x20 I can get a nice concave look
As my car is carpethian grey I am looking at platinum black for the wheels
My p b brakes should be shipping Monday
Gone for same kit as you
Red calipers and floating drilled and grooved discs
-
- Posts: 57
- Joined: Wed Aug 02, 2023 11:04 pm
I'm going to get 20" Concaver wheels as well for my P450. I'm going to keep factory width of wheels but I'm thinking of choosing a lower offset to push the wheels out a bit. Question is how much smaller can the offset be so that the tyres don't rub on fender arches? Is 5 mm going to be even noticeable? Or should I go for 10 mm smaller offset without worrying about rubbing or that it's going to look ugly?
Gasman, which size did you choose and do you have any pics to show to help me get an idea?
Gasman, which size did you choose and do you have any pics to show to help me get an idea?
I’ve got to say that’s a stunning looking car, nicely set off with the yellow highlights.Alasdair63 wrote: ↑Thu Mar 17, 2022 8:33 pm Hi Gasman,I have vorsteiner v FF 103 a ET32 and ET 50 and no need for wheel spacers
SVR Coupe in Ammonite.
-
- You may also be interested in...
- Replies
- Views
- Last post