Car history check

Anything F-Type related......
Post Reply
Chris Finch
Posts: 11
Joined: Mon Nov 13, 2023 7:42 pm

Post by Chris Finch »

I have seen a lot of people asking for history checks so hope this is ok as a newbie!
Got my eye on a P300 LT18 ZYL.

https://www.autotrader.co.uk/car-detail ... 23&fromsra

What are people’s thoughts on this?

User avatar
Tel
Posts: 2383
Joined: Sat Apr 19, 2014 7:26 pm
Location: Deepest, Darkest, Darzet.

Post by Tel »

Car - # 51952
Engine #170622Y0061PT204
Reg'd - 31/03/2018
3 MoT's all passed with an advisory on the last @16950 miles - Nearside Front Tyre has a cut but not deep enough to reach the ply or cords perished on outer sidewall
VED - Expired, 03/11/23 - £570 to renew for 12 month
PDI'd - Grange Land Rover, Barnet on 19/07/2017
OSH - Service at Willington Garage @ 6119 mi (32000 miles / 24 months service) and then Chesham Autos Motor Repairs & MOT Station @11690 mi

Without getting on my back and crawling underneath with an inspection lamp, I cannot gauge the level of corrosion on any mild Steel components.
Go for it, if you like it.
2016MY V8R IRR
ITG Maxogen Cold air intake kit
Billet OBD lock
Forged lightweight Blades
Full custom Xpel Ultimate PPF wrap
Piano Black badges
17mm MST Hubcentrics
Smarttop remote
Black exhaust tips
Porterfield RS-4 Carbon Kevlar pads
Mich PS4S's
+ more 💩
Chris Finch
Posts: 11
Joined: Mon Nov 13, 2023 7:42 pm

Post by Chris Finch »

Tel wrote: Wed Nov 15, 2023 6:34 am Car - # 51952
Engine #170622Y0061PT204
Reg'd - 31/03/2018
3 MoT's all passed with an advisory on the last @16950 miles - Nearside Front Tyre has a cut but not deep enough to reach the ply or cords perished on outer sidewall
VED - Expired, 03/11/23 - £570 to renew for 12 month
PDI'd - Grange Land Rover, Barnet on 19/07/2017
OSH - Service at Willington Garage @ 6119 mi (32000 miles / 24 months service) and then Chesham Autos Motor Repairs & MOT Station @11690 mi

Without getting on my back and crawling underneath with an inspection lamp, I cannot gauge the level of corrosion on any mild Steel components.
Go for it, if you like it.
Really appreciate the reply mate. Thank you
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post