How I got my low front plate look:
(I couldn’t wait long enough to order from the US a Sto N Sho, which looks like the ideal solution)
- Bought 3M VHB 5952 Adhesive Tape (from a popular online retailer).
Bought three Powder-coated Steel Angle brackets (H)55mm (W)70mm (L)70mm (from a popular DIY store).
- Removed old plate and mount from crossbar (three screws, looked factory fit), few holes that can get spot repaired.
- Stuck the tape on the brackets (if you look at it as an L then on top of the horizontal to stick up under the splitter, and on the left / outside of the vertical to stick the plate to).
- Stuck the brackets to the underside of the front splitter (where the Sto N Sho would bolt to; as there’s an existing bolt I put the middle bracket to the right of this).
- Stuck the plate to the front of the bracket.